Rigol DSA832E-TG 9kHz-3.2GHz Spectrum Analyzer with Tracking Generator

Available:

NEW

£3,000 excl VAT £1,825 excl VAT

RENT

Monthly: POA

The Rigol DSA832E-TG (Tracking Generator) Portable Spectrum Analyser covers the frequency range of 9 kHz to 3.2GHz with a resolution bandwidth of 10Hz and an 8 Inch Color Screen. You’ll love the performance and your CFO will love the cost.

The Rigol DSA832E-TG  replaces the Rigol DSA 1030-TG with a more reliable and higher performance solution. This particular model can be used for several applications including R&D, wireless testing, production, debugging & more but it is specifically geared towards offering an inexpensive solution for EMI/EMC Pre-compliance testing. Optional accessories for EMC Pre-compliance include EMI S1210 Software, Near Field Probes, EMI-Quasi Peak Detector and VSWR Bridge. 

The Rigol Spectrum Analysers all offer digital IF design enabling smaller bandwidth settings thus significantly reducing the displayed average noise level. Engineers can easily distinguish signals with a frequency difference of only 10Hz with thhe Rigol DSA 832E-TG spectrum analyzer. Eliminate errors generated by filter switching, reference level uncertainty and scale distortion with the high precision amplitude readings of the units. Sometimes when using the traditional analogue IF design errors are created from the procedure of switching between logarithmic and linear displays of amplitude this is eliminated with the digital IF design of the Rigol spectrum analyzers.

Communication interfaces for the Rigol DSA832E and DSA832-TG include LAN (LXI), USB as standard and GPIB as an option.  More information can be found under the documents tab.

Compatible with the Below EMC Standards:

in line with EN61326-1:2006

IEC 61000-4-2:2001

±4.0 kV (contact discharge), ±4.0 kV (air discharge)

IEC 61000-4-3:2002

3 V/m (80 MHz to 1 GHz), 3 V/m (1.4 GHz to 2 GHz), 1 V/m (2.0 GHz to 2.7 GHz)

IEC 61000-4-4:2004

1 kV power lines

IEC 61000-4-5:2001

0.5 kV (phase to neutral), 0.5 kV (phase to PE), 1 kV (neutral to PE)

IEC 61000-4-6:2003

3 V, 0.15 to 80 MHz

IEC 61000-4-11:2004

voltage dip: 0% UT during half cycle, 0% UT during 1 cycle, 70% UT during 25 cycles

short interruption: 0% UT during 250 cycles